Scratch Fix Pen by Miller Single Pen

The Scratch Fix Pen is a oil based wood stain marker (not ink) designed to correct surface scratches, nicks, and chip marks on timber and veneer furniture. Use it when the damage penetrates through the topcoat, exposing wood or when a coloured mark is visible but the wood grain pattern is intact. (Referenced from product listing: “minor repairs and touch ups on timber and veneer furniture”)

The Scratch Fix Pens are offered in five wood-tone colours: Light Brown, Medium Brown, Dark Brown, Red Brown, and Black Brown. Buyers often choose a close match or mix tones. For best results, test on an inconspicuous area under natural light before use.

Each pen features a unique filter tip which ensures even pigment delivery and long lifespan (typically over 1,000 applications). This filtering system helps prevent over-application and keeps the flow steady, letting you layer gradually for deeper colour coverage.

• Clean the damaged area of dust or grime.

• Gently stroke the pen over the scratch, following the grain—use light pressure.

• Wait a few seconds to let the stain set.

• Add additional passes if deeper colour is needed (allow drying between coats).

• Once satisfied, finish with your regular wax or polish; because the pen uses stain (not ink), wiping or polishing won’t smear the repair.

Yes. Because the pen uses actual wood stain rather than ink, once applied and dried, you can safely overcoat with waxes or polishes without smudging. Many users buff or wax after application to blend the repair with surrounding finish.

When properly applied and sealed, a pen repair is long-lasting. The stain penetrates through the surface, binding within the wood fibers. However, in areas subject to abrasion (e.g. chair arms, tabletops), occasional touch-up may be required.

The pen is not a filler—it colors surface damage only. Deep gouges, structural damage, or missing wood material require wax putty, filler, or professional repair. On shallow hairline scratches complete with intact finish coating, the pen may not fully conceal.

Yes. Users commonly use the pen on floorboards, timber doors, wood paneling, door jambs, and window frames—any stained wood surface where scratches are visible. The same technique applies across these surfaces.

If your furniture has a single dominant tone, a single pen matching that colour is sufficient. A 5-colour pack is beneficial if your home contains multiple timber tones, or for flexibility during future repairs. The multi-pack often offers a cost saving over purchasing single pens.

Store the pen horizontally and make sure the cap is tightly closed to prevent drying out. Use with care—avoid dropping or damaging the tip. With the built-in filter and durable tip, each pen typically yields over 1,000 applications.

Always test in an inconspicuous area before using. Always test on a small, hidden section before first use.
Results may vary depending on furniture age, finish, and type of timber. Aussie Furniture Care is not responsible for damage caused by incorrect use.